DescriptionDetails & specsAttachments
Body Kit for Ford Focus RS Wagon mk3.
Body Kit includes:
- Fender Flares;
- Front Splitter;
- Side Splitters (Sideskirts);
- Rear Bumper Spats;
- Rear Diffuser;
- Spoiler;
The kit adds 1.18"(30mm) to each side.
Front Splitter fits only to RS Front Bumper.
Side Splitters can be installed on ST and ST-line/Zetec Sport vesrions.
Rear Diffuser will fit Focus mk3 wagon/estate, but you will need to modify your exhaust by intstalling rear section with muffler from RS mk3 (need spacers for exhaus tips because of longer rear overhang than on hatchback) or making custom exhaust.
Diffuser utilizes reflectors from RS mk3 Hatchback, those are same as in ST Wagon/Estate. This way if you are installing our diffuser instead of ST bumper just transfer reflectors from it or you can order using those part numbers:
Left: CM51-515C0-BB 1803911
Right: CM51-515B0-BB 1803910
We recommend using following wheel setups:
- 19x8.5J ET30-35 rims, with 235x35 tires;
- 19x9J ET40 rims, with 245/35 tires;
- 20x9J ET40 rims, with 245/30 tires;
For proper look set of lowering springs or coilover kit or air suspension is recommended.
Installation does not require driling or cutting stock metal fenders.
Material: Fibre-reinforced plastic (FPR).
Comes in black primer, ready for painting.
Body Kit includes:
- Fender Flares;
- Front Splitter;
- Side Splitters (Sideskirts);
- Rear Bumper Spats;
- Rear Diffuser;
- Spoiler;
The kit adds 1.18"(30mm) to each side.
Front Splitter fits only to RS Front Bumper.
Side Splitters can be installed on ST and ST-line/Zetec Sport vesrions.
Rear Diffuser will fit Focus mk3 wagon/estate, but you will need to modify your exhaust by intstalling rear section with muffler from RS mk3 (need spacers for exhaus tips because of longer rear overhang than on hatchback) or making custom exhaust.
Diffuser utilizes reflectors from RS mk3 Hatchback, those are same as in ST Wagon/Estate. This way if you are installing our diffuser instead of ST bumper just transfer reflectors from it or you can order using those part numbers:
Left: CM51-515C0-BB 1803911
Right: CM51-515B0-BB 1803910
We recommend using following wheel setups:
- 19x8.5J ET30-35 rims, with 235x35 tires;
- 19x9J ET40 rims, with 245/35 tires;
- 20x9J ET40 rims, with 245/30 tires;
For proper look set of lowering springs or coilover kit or air suspension is recommended.
Installation does not require driling or cutting stock metal fenders.
Material: Fibre-reinforced plastic (FPR).
Comes in black primer, ready for painting.